v1beta3

type APIEndpoint struct {
	// AdvertiseAddress sets the IP address for the API server to advertise.
	// +optional
	AdvertiseAddress string `json:"advertiseAddress,omitempty"`

	// BindPort sets the secure port for the API Server to bind to.
	// Defaults to 6443.
	// +optional
	BindPort int32 `json:"bindPort,omitempty"`
}

type APIServer struct {
	ControlPlaneComponent `json:",inline"`

	// CertSANs sets extra Subject Alternative Names for the API Server signing cert.
	// +optional
	CertSANs []string `json:"certSANs,omitempty"`

	// TimeoutForControlPlane controls the timeout that we use for API server to appear
	// +optional
	TimeoutForControlPlane *metav1.Duration `json:"timeoutForControlPlane,omitempty"`
}

type BootstrapTokenDiscovery struct {
	// Token is a token used to validate cluster information
	// fetched from the control-plane.
	Token string `json:"token" datapolicy:"token"`

	// APIServerEndpoint is an IP or domain name to the API server from which info will be fetched.
	// +optional
	APIServerEndpoint string `json:"apiServerEndpoint,omitempty"`

	// CACertHashes specifies a set of public key pins to verify
	// when token-based discovery is used. The root CA found during discovery
	// must match one of these values. Specifying an empty set disables root CA
	// pinning, which can be unsafe. Each hash is specified as "<type>:<value>",
	// where the only currently supported type is "sha256". This is a hex-encoded
	// SHA-256 hash of the Subject Public Key Info (SPKI) object in DER-encoded
	// ASN.1. These hashes can be calculated using, for example, OpenSSL.
	// +optional
	CACertHashes []string `json:"caCertHashes,omitempty" datapolicy:"security-key"`

	// UnsafeSkipCAVerification allows token-based discovery
	// without CA verification via CACertHashes. This can weaken
	// the security of kubeadm since other nodes can impersonate the control-plane.
	// +optional
	UnsafeSkipCAVerification bool `json:"unsafeSkipCAVerification,omitempty"`
}

type ClusterConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// Etcd holds configuration for etcd.
	// +optional
	Etcd Etcd `json:"etcd,omitempty"`

	// Networking holds configuration for the networking topology of the cluster.
	// +optional
	Networking Networking `json:"networking,omitempty"`

	// KubernetesVersion is the target version of the control plane.
	// +optional
	KubernetesVersion string `json:"kubernetesVersion,omitempty"`

	// ControlPlaneEndpoint sets a stable IP address or DNS name for the control plane; it
	// can be a valid IP address or a RFC-1123 DNS subdomain, both with optional TCP port.
	// In case the ControlPlaneEndpoint is not specified, the AdvertiseAddress + BindPort
	// are used; in case the ControlPlaneEndpoint is specified but without a TCP port,
	// the BindPort is used.
	// Possible usages are:
	// e.g. In a cluster with more than one control plane instances, this field should be
	// assigned the address of the external load balancer in front of the
	// control plane instances.
	// e.g.  in environments with enforced node recycling, the ControlPlaneEndpoint
	// could be used for assigning a stable DNS to the control plane.
	// +optional
	ControlPlaneEndpoint string `json:"controlPlaneEndpoint,omitempty"`

	// APIServer contains extra settings for the API server control plane component
	// +optional
	APIServer APIServer `json:"apiServer,omitempty"`

	// ControllerManager contains extra settings for the controller manager control plane component
	// +optional
	ControllerManager ControlPlaneComponent `json:"controllerManager,omitempty"`

	// Scheduler contains extra settings for the scheduler control plane component
	// +optional
	Scheduler ControlPlaneComponent `json:"scheduler,omitempty"`

	// DNS defines the options for the DNS add-on installed in the cluster.
	// +optional
	DNS DNS `json:"dns,omitempty"`

	// CertificatesDir specifies where to store or look for all required certificates.
	// +optional
	CertificatesDir string `json:"certificatesDir,omitempty"`

	// ImageRepository sets the container registry to pull images from.
	// If empty, `k8s.gcr.io` will be used by default; in case of kubernetes version is a CI build (kubernetes version starts with `ci/`)
	// `gcr.io/k8s-staging-ci-images` will be used as a default for control plane components and for kube-proxy, while `k8s.gcr.io`
	// will be used for all the other images.
	// +optional
	ImageRepository string `json:"imageRepository,omitempty"`

	// FeatureGates enabled by the user.
	// +optional
	FeatureGates map[string]bool `json:"featureGates,omitempty"`

	// The cluster name
	// +optional
	ClusterName string `json:"clusterName,omitempty"`
}

type ControlPlaneComponent struct {
	// ExtraArgs is an extra set of flags to pass to the control plane component.
	// A key in this map is the flag name as it appears on the
	// command line except without leading dash(es).
	// TODO: This is temporary and ideally we would like to switch all components to
	// use ComponentConfig + ConfigMaps.
	// +optional
	ExtraArgs map[string]string `json:"extraArgs,omitempty"`

	// ExtraVolumes is an extra set of host volumes, mounted to the control plane component.
	// +optional
	ExtraVolumes []HostPathMount `json:"extraVolumes,omitempty"`
}

type DNS struct {
	// ImageMeta allows to customize the image used for the DNS component
	ImageMeta `json:",inline"`
}

type DNSAddOnType string

type Discovery struct {
	// BootstrapToken is used to set the options for bootstrap token based discovery
	// BootstrapToken and File are mutually exclusive
	// +optional
	BootstrapToken *BootstrapTokenDiscovery `json:"bootstrapToken,omitempty"`

	// File is used to specify a file or URL to a kubeconfig file from which to load cluster information
	// BootstrapToken and File are mutually exclusive
	// +optional
	File *FileDiscovery `json:"file,omitempty"`

	// TLSBootstrapToken is a token used for TLS bootstrapping.
	// If .BootstrapToken is set, this field is defaulted to .BootstrapToken.Token, but can be overridden.
	// If .File is set, this field **must be set** in case the KubeConfigFile does not contain any other authentication information
	// +optional
	TLSBootstrapToken string `json:"tlsBootstrapToken,omitempty" datapolicy:"token"`

	// Timeout modifies the discovery timeout
	// +optional
	Timeout *metav1.Duration `json:"timeout,omitempty"`
}

type Etcd struct {

	// Local provides configuration knobs for configuring the local etcd instance
	// Local and External are mutually exclusive
	// +optional
	Local *LocalEtcd `json:"local,omitempty"`

	// External describes how to connect to an external etcd cluster
	// Local and External are mutually exclusive
	// +optional
	External *ExternalEtcd `json:"external,omitempty"`
}

type ExternalEtcd struct {
	// Endpoints of etcd members. Required for ExternalEtcd.
	Endpoints []string `json:"endpoints"`

	// CAFile is an SSL Certificate Authority file used to secure etcd communication.
	// Required if using a TLS connection.
	CAFile string `json:"caFile"`

	// CertFile is an SSL certification file used to secure etcd communication.
	// Required if using a TLS connection.
	CertFile string `json:"certFile"`

	// KeyFile is an SSL key file used to secure etcd communication.
	// Required if using a TLS connection.
	KeyFile string `json:"keyFile"`
}

type FileDiscovery struct {
	// KubeConfigPath is used to specify the actual file path or URL to the kubeconfig file from which to load cluster information
	KubeConfigPath string `json:"kubeConfigPath"`
}

type HostPathMount struct {
	// Name of the volume inside the pod template.
	Name string `json:"name"`
	// HostPath is the path in the host that will be mounted inside
	// the pod.
	HostPath string `json:"hostPath"`
	// MountPath is the path inside the pod where hostPath will be mounted.
	MountPath string `json:"mountPath"`
	// ReadOnly controls write access to the volume
	// +optional
	ReadOnly bool `json:"readOnly,omitempty"`
	// PathType is the type of the HostPath.
	// +optional
	PathType corev1.HostPathType `json:"pathType,omitempty"`
}

type ImageMeta struct {
	// ImageRepository sets the container registry to pull images from.
	// if not set, the ImageRepository defined in ClusterConfiguration will be used instead.
	// +optional
	ImageRepository string `json:"imageRepository,omitempty"`

	// ImageTag allows to specify a tag for the image.
	// In case this value is set, kubeadm does not change automatically the version of the above components during upgrades.
	// +optional
	ImageTag string `json:"imageTag,omitempty"`
}

type InitConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// BootstrapTokens is respected at `kubeadm init` time and describes a set of Bootstrap Tokens to create.
	// This information IS NOT uploaded to the kubeadm cluster configmap, partly because of its sensitive nature
	// +optional
	BootstrapTokens []bootstraptokenv1.BootstrapToken `json:"bootstrapTokens,omitempty"`

	// NodeRegistration holds fields that relate to registering the new control-plane node to the cluster
	// +optional
	NodeRegistration NodeRegistrationOptions `json:"nodeRegistration,omitempty"`

	// LocalAPIEndpoint represents the endpoint of the API server instance that's deployed on this control plane node
	// In HA setups, this differs from ClusterConfiguration.ControlPlaneEndpoint in the sense that ControlPlaneEndpoint
	// is the global endpoint for the cluster, which then loadbalances the requests to each individual API server. This
	// configuration object lets you customize what IP/DNS name and port the local API server advertises it's accessible
	// on. By default, kubeadm tries to auto-detect the IP of the default interface and use that, but in case that process
	// fails you may set the desired value here.
	// +optional
	LocalAPIEndpoint APIEndpoint `json:"localAPIEndpoint,omitempty"`

	// CertificateKey sets the key with which certificates and keys are encrypted prior to being uploaded in
	// a secret in the cluster during the uploadcerts init phase.
	// +optional
	CertificateKey string `json:"certificateKey,omitempty"`

	// SkipPhases is a list of phases to skip during command execution.
	// The list of phases can be obtained with the "kubeadm init --help" command.
	// The flag "--skip-phases" takes precedence over this field.
	// +optional
	SkipPhases []string `json:"skipPhases,omitempty"`

	// Patches contains options related to applying patches to components deployed by kubeadm during
	// "kubeadm init".
	// +optional
	Patches *Patches `json:"patches,omitempty"`
}

type JoinConfiguration struct {
	metav1.TypeMeta `json:",inline"`

	// NodeRegistration holds fields that relate to registering the new control-plane node to the cluster
	// +optional
	NodeRegistration NodeRegistrationOptions `json:"nodeRegistration,omitempty"`

	// CACertPath is the path to the SSL certificate authority used to
	// secure comunications between node and control-plane.
	// Defaults to "/etc/kubernetes/pki/ca.crt".
	// +optional
	CACertPath string `json:"caCertPath,omitempty"`

	// Discovery specifies the options for the kubelet to use during the TLS Bootstrap process
	Discovery Discovery `json:"discovery"`

	// ControlPlane defines the additional control plane instance to be deployed on the joining node.
	// If nil, no additional control plane instance will be deployed.
	// +optional
	ControlPlane *JoinControlPlane `json:"controlPlane,omitempty"`

	// SkipPhases is a list of phases to skip during command execution.
	// The list of phases can be obtained with the "kubeadm join --help" command.
	// The flag "--skip-phases" takes precedence over this field.
	// +optional
	SkipPhases []string `json:"skipPhases,omitempty"`

	// Patches contains options related to applying patches to components deployed by kubeadm during
	// "kubeadm join".
	// +optional
	Patches *Patches `json:"patches,omitempty"`
}

type JoinControlPlane struct {
	// LocalAPIEndpoint represents the endpoint of the API server instance to be deployed on this node.
	// +optional
	LocalAPIEndpoint APIEndpoint `json:"localAPIEndpoint,omitempty"`

	// CertificateKey is the key that is used for decryption of certificates after they are downloaded from the secret
	// upon joining a new control plane node. The corresponding encryption key is in the InitConfiguration.
	// +optional
	CertificateKey string `json:"certificateKey,omitempty"`
}

type LocalEtcd struct {
	// ImageMeta allows to customize the container used for etcd
	ImageMeta `json:",inline"`

	// DataDir is the directory etcd will place its data.
	// Defaults to "/var/lib/etcd".
	DataDir string `json:"dataDir"`

	// ExtraArgs are extra arguments provided to the etcd binary
	// when run inside a static pod.
	// A key in this map is the flag name as it appears on the
	// command line except without leading dash(es).
	// +optional
	ExtraArgs map[string]string `json:"extraArgs,omitempty"`

	// ServerCertSANs sets extra Subject Alternative Names for the etcd server signing cert.
	// +optional
	ServerCertSANs []string `json:"serverCertSANs,omitempty"`
	// PeerCertSANs sets extra Subject Alternative Names for the etcd peer signing cert.
	// +optional
	PeerCertSANs []string `json:"peerCertSANs,omitempty"`
}

type Networking struct {
	// ServiceSubnet is the subnet used by k8s services. Defaults to "10.96.0.0/12".
	// +optional
	ServiceSubnet string `json:"serviceSubnet,omitempty"`
	// PodSubnet is the subnet used by pods.
	// +optional
	PodSubnet string `json:"podSubnet,omitempty"`
	// DNSDomain is the dns domain used by k8s services. Defaults to "cluster.local".
	// +optional
	DNSDomain string `json:"dnsDomain,omitempty"`
}

type NodeRegistrationOptions struct {

	// Name is the `.Metadata.Name` field of the Node API object that will be created in this `kubeadm init` or `kubeadm join` operation.
	// This field is also used in the CommonName field of the kubelet's client certificate to the API server.
	// Defaults to the hostname of the node if not provided.
	// +optional
	Name string `json:"name,omitempty"`

	// CRISocket is used to retrieve container runtime info. This information will be annotated to the Node API object, for later re-use
	// +optional
	CRISocket string `json:"criSocket,omitempty"`

	// Taints specifies the taints the Node API object should be registered with. If this field is unset, i.e. nil, in the `kubeadm init` process
	// it will be defaulted to []v1.Taint{'node-role.kubernetes.io/master=""'}. If you don't want to taint your control-plane node, set this field to an
	// empty slice, i.e. `taints: []` in the YAML file. This field is solely used for Node registration.
	Taints []corev1.Taint `json:"taints"`

	// KubeletExtraArgs passes through extra arguments to the kubelet. The arguments here are passed to the kubelet command line via the environment file
	// kubeadm writes at runtime for the kubelet to source. This overrides the generic base-level configuration in the kubelet-config-1.X ConfigMap
	// Flags have higher priority when parsing. These values are local and specific to the node kubeadm is executing on.
	// A key in this map is the flag name as it appears on the
	// command line except without leading dash(es).
	// +optional
	KubeletExtraArgs map[string]string `json:"kubeletExtraArgs,omitempty"`

	// IgnorePreflightErrors provides a slice of pre-flight errors to be ignored when the current node is registered.
	// +optional
	IgnorePreflightErrors []string `json:"ignorePreflightErrors,omitempty"`

	// ImagePullPolicy specifies the policy for image pulling during kubeadm "init" and "join" operations.
	// The value of this field must be one of "Always", "IfNotPresent" or "Never".
	// If this field is unset kubeadm will default it to "IfNotPresent", or pull the required images if not present on the host.
	// +optional
	ImagePullPolicy corev1.PullPolicy `json:"imagePullPolicy,omitempty"`
}

type Patches struct {
	// Directory is a path to a directory that contains files named "target[suffix][+patchtype].extension".
	// For example, "kube-apiserver0+merge.yaml" or just "etcd.json". "target" can be one of
	// "kube-apiserver", "kube-controller-manager", "kube-scheduler", "etcd". "patchtype" can be one
	// of "strategic" "merge" or "json" and they match the patch formats supported by kubectl.
	// The default "patchtype" is "strategic". "extension" must be either "json" or "yaml".
	// "suffix" is an optional string that can be used to determine which patches are applied
	// first alpha-numerically.
	// +optional
	Directory string `json:"directory,omitempty"`
}